9083P

17th Edition Multi Function Tester

The all new 9083P multi function tester has been designed to fully comply with the testing requirements of the 17th Edition. It also incorporates many of the features that you have requested. It is a hand held unit which enables rapid and easy range setting and testing.

The unique RCD-LOC feature allows loop testing without tripping any type of RCBD. The 9083P meets all the safety and performance requirements of BS EN 61557.

 

Features;

  • Continuity test – with auto null facility to zero out lead resistance
  • RCD testing – Trip time, trip current, auto test and ramp current
  • Prospective short circuit current – direct readout of PSCC
  • Insulation measurement – with 100, 250 and 500 V test voltages
  • Loop Impedance – Unique loop test principle will not trip any RCD
  • RCD auto test – test RCDs in auto mode without going back to the tester
  • Integrated socket polarity test
  • Fully protected – against damage when accidently connected across phases

Trade Price

£769.00

Calibration

£70.00

 
Display 3½ digit LCD 1999 digits
Insulation resistance 0.05 – 2000 MΩ
Test voltage at 1mA 100, 250,500 V
Continuity 0.05 – 199 Ω
Loop Impedance 0.01 – 2000 Ω
PSCC 0 – 26 kA
RCD nominal test currents 10, 30, 100, 300, 500 mA, ½ x 30 mA, 5 x 30 mA
Trip time 0 – 500 ms
Tripping current with ramp test ½ rated current to 1.1 rated current
Voltage 0 – 440 V
Frequency 45 – 65 Hz
Safety standards EN61010, BS EN 61557 BS 7671
Over voltage category CAT III 300 V
Power supply 6 x 1.5 V AA batteries
Dimensions 260 x 105 x 55 mm
Weight 836 g

Now available is PowerGuard Pro
and PowerGuard Pro Mobile, the
comprehensive software package
for creating a range of test
and inspections certificates.