EV Test Equipment Range from Di-LOG - Voltimum
The continued growth of Electric Vehicles (EV) is at a record level, adding immense pressure to the UK population to meet the growing demand for increased EV charging infrastructure.
So will you be installing EV charge points in the future?
Yes, there is every possibility that you will be installing EV chargers in the future if you are not doing so already.
According to Zap-Map, the UK’s leading app for EV drivers, at the end of May 2022, there were 32,312 charging points across the UK, across 19,945 charging locations. This represents a 32% increase in the number of charging devices since May 2021.
These figures do not include the many charge points installed at home or at workplace locations, which are estimated to be more than 400,000. Some of these charge points are available to the public in some form via community or visitor charging. (Information source: www.zap-map.com)
The DL9100 series MFT is built upon the award-winning 18th Edition Installation Multifunction Tester range. This series features a new hardware and firmware platform that unlocks exciting new capabilities while maintaining the user-friendly operational design that our customers love. Notably, the Type B (Pure DC) RCD test has been added to the range, enabling a suite of tests specifically geared towards the EV and PV sectors. Additionally, the intelligent high current Loop/PSCC test is fully auto-sensing and can detect whether the user is conducting a 2 wire or 3 wire test without requiring manual selection. A new RGB screen with colour-changing alarms has been introduced, indicating triggers or warnings as required. The MFT also includes variable RCD testing and a full secondary display to record results.
The DLEV1 adaptor is NEW and works perfectly along side the DL9130EV MFT.
The DLEV1 is a universal EVSE Charge Station Adaptor Kit that will simulate the Proximity Pilot (PP) States and Control Pilot (CP) States required to energise a free-standing or wall-mounted EV charger. Supplied with a type 1 and type 2 connector plug specifically designed for testing, the DLEV1 kit will also simulate PE Pre-test, CP Error “E” and PE Error with the added feature of CP signal output and load connection.
The DLEV1 has a 13A socket for MFT mains lead or can be used for inline load connection. In addition to this, there are also 4mm input terminals for single or 3-phase connections.
“Even the features have new features!”
A unique new feature added specifically to the DL9130EV is Rmax, this brand-new concept will automatically capture the maximum R1+R2 & R2 continuity test reading registering the result on the secondary display for recording once the circuit continuity testing is complete.
One of our new user features is the addition of the Zmax function. Whilst performing a non-trip Earth Loop Test using our patented RCD-LOC Xpert Loop Technology, you can track your maximum Zs measurement by simply pressing the Zmax function key before recording the maximum measurement on the secondary display.
Di-Log Test Equipment
28 Wheel Forge Way, Trafford Park, Manchester, M17 1EHSales
Tel. 0161 877 0322Fax. 0161 877 1614
sales@dilog.co.uk
Administration
Tel. 0161 877 0322Fax. 0161 877 1614
Service Support Team
Call now on 0161 877 0322Email now on support@dilog.co.uk