18th Edition Testers
Designed to make electrical installation testing safer and more efficient, our range of multifunction testers perform all tests required by 18th Edition wiring regulations.
The DL9110 is also packed full of features, such as a Auto Start Loop & Continuity, the UK's largest colour changing RGB LCD display screen indicating error, Auto RCD test with Ramp feature and has Full Range Protection if tester is accidentally connected to voltage on a dead test.
Special offer
£519.00
Multifunction Testers
Di-LOG 18th Edition Multifunction Testers are fully compliant to the latest standards set by BS7671 fitted with the latest instrument technology.
The DL9130EVPVKIT, supplied with the DL9130EV and DLEV1 EVSE Adaptor, SL102 Irradiance Meter, and the DL6402 1000Amp AC/DC Clamp Meter. The kit has many new and exciting features critical to the safe verification of EVSE Charge Station Installation including a 6mA pure DC test for RDC-DD verification and a full EV testing sequence for verifying the DC protection provided by the EV charger. The Irradiance meter can measure up to 1999 W/m², and the 1000Amp Clamp meter can also measure up to 600V with it's 30mm wide jaw opening.
Special offer
£1019.00
The DL9120 has many exciting new features including a brand new RGB colour changing screen visually indicating potential pass/fail conditions, a Type B RCD test & a 2/3 wire high current loop with intelligent detection identifying if the user is conducting a 2 wire or 3 wire Loop test without the need for selection
Special offer
£699.00
The DLEV1 is a universal EVSE Charge Station Adaptor Kit that will simulate the Proximity Pilot (PP) States and Control Pilot (CP) States required to energise a free-standing or wall-mounted EV charger.
Special offer
£325.00
The DL9130EVKIT, supplied with the DL9130EV and DLEV1 EVSE Adaptor has many new and exciting features critical to the safe verification of EVSE Charge Station Installation including a 6mA pure DC test for RDC-DD verification and a full EV testing sequence for verifying the DC protection provided by the EV charger.
Special offer
£999.00
ALL NEW – The DL9130EV has many new and exciting features critical to the safe verification of EVSE Charge Station Installation including a 6mA pure DC test for RDC-DD verification and a full EV testing sequence for verifying the DC protection provided by the EV charger, along with the Type A RCD protection.
Special offer
£849.00
The DL9110 is also packed full of features, such as a Auto Start Loop & Continuity, the UK's largest colour changing RGB LCD display screen indicating error, Auto RCD test with Ramp feature and has Full Range Protection if tester is accidentally connected to voltage on a dead test.
Special offer
£519.00
Insulation Testers
Di-log Insulation Testers fully meet the requirement set out in BS EN61557 offering high quality and accuracy across the range
Insulation/Continuity Tester – Large back lit digital display of test values. The double moulded case makes this instrument suitable for the most rugged applications.
£395.00
Checkboxes & Calcards
Seaward's PowerCheck 1557 is the most comprehensive combined 17th Edition and PAT checkbox in the UK. Offering the user full interim checking in addition to annual calibration
The DLEV1 is a universal EVSE Charge Station Adaptor Kit that will simulate the Proximity Pilot (PP) States and Control Pilot (CP) States required to energise a free-standing or wall-mounted EV charger.
Special offer
£325.00
The CalCard® Resistance Check Card is the only card solution to fully meet these criteria and thereby accepted and approved by all regulatory bodies.
£29.95
A comprehensive verification of 17th Edition and PAT's. The Powercheck tests for full earth continuity, insulation, resistance, RCD trip time, RCD trip current, touch current and verification
£569.00
Earth Restance Tester – The DL9062 Digital Earth Resistance Tester is direct replacement of the conventional hand generator type tester.
£395.00